Swedish House Crafts Guest Design Team Post ft. Paper Nest Dolls 'Elephants'

 Hello crafters!  Thank you so much for joining me here today on my blog!  I'm very excited to be a Guest Designer over at Swedish House Crafts today; welcome if you have joined me from there!

My card today features a stamp set from Paper Nest Dolls called Elephants.  There are lots of cute elephant stamps in the set and I have used one on my card today....I also snuck in another elephant on a matching tag (see other photo).

 I used lots of different dies from my stash to create this dimentional card.  The scallop base is the Lawn Fawn Inside Stitched Scallop Rectangle Die and the quilted panel is also a Lawn Fawn die-Quilted Backdrop.

To create a focal area for my elephant I used some square scalloped frames from MFT.  I originally just used the larger frame but it just didn't look right (my elephant looked a little bit lost) so I left the card on my desk (for about a week!) until I could work out how I wanted to proceed.  I finally had a eureka moment and cut another smaller frame to better place my elephant inside and I was really happy with how this looked.

Behind the frame, on the scalloped panel/base I used some distress inks to lightly blend on a scene.  I made sure to mask the area with post it tape to keep the colour with in the frame area.  I used some distress inks to create a sky and some grass.  

I used copic markers to colour my elephant - all of the colours I used are listed in the visual below:

I fussy cut the image using my cutterbee scissors.

I added some dimention to the card by popping foam adhesive squares behind the quilted panel, the large & small frame and the elephant.  All elements were adhered to the base layer and then adhered to a side folding A2 (american) sized card base.

I created a simply sentiment layering the white card on to a base of pink inked card.  I die cut some hearts from the same pink card and adhered them to the sentiment finishing with some glaze pen to make the shine.

The corners of the card were embellished with some cute dies from CC Designs.

Finally, to complete the card I liberally covered the elephants dress, bow and both frames with Nuvo aqua shimmer pen.

I hope you enjoyed my guest design team project!  All of the supplies are listed below.  Thank you to Swedish House Crafts for having me today!

https://www.swedishhousecrafts.co.uk

Supplies

• Paper Nest Dolls ELEPHANTS
——— https://bit.ly/2YQQqlP [ SHC ]

• Lawn Fawn OUTSIDE IN STITCHED SCALLOP RECTANGLE STACKABLES
——— http://tiny.cc/43sh7y [ SSS ]
——— http://tiny.cc/e3sh7y [ CST ]

• Lawn Fawn QUILTED BACKGROUND die
——— http://tiny.cc/u4sh7y [ SSS ]
——— http://tiny.cc/55sh7y [ DST]

• My Favorite Things STITCHED SQUARE SCALLOP FRAMES DIE-NAMICS
——— http://tiny.cc/q6sh7y [ SSS ]
——— http://tiny.cc/z7sh7y [ DST ]
——— http://tiny.cc/rath7y [ SVN ]

• Clearly Besotted SWEET LITTLE SENTIMENTS STAMPS
—— http://tiny.cc/vbth7y [ SSS ]
— http://tiny.cc/bdth7y [ CLB ]

• CC Designs QUAD COLLAGE DIE
——— http://tiny.cc/kfth7y [ DST ]
——— http://tiny.cc/9ith7y [ CCD ]

• Tim Holtz Distress Ink Pad TUMBLED GLASS
——— http://tiny.cc/jkth7y [ SSS ]
——— http://tiny.cc/jmth7y [ CST ]

• Tim Holtz Distress Ink Pad EVERGREEN BOUGH
——— http://tiny.cc/roth7y [ SSS ]
——— http://tiny.cc/brth7y [ CST ]

• Tim Holtz Distress Oxide Pad SALTY OCEAN
——— http://tiny.cc/ksth7y [ SSS ]
——— http://tiny.cc/ksth7y [ CST ]

• Tim Holtz Distress Ink Pad PICKED RASPBERRY
——— http://tiny.cc/nxth7y [ SSS ]
——— http://tiny.cc/fzth7y [ CST ]

• Scrapbook Adhesives 3D FOAM SQUARES
——— http://tiny.cc/u2th7y [ SSS ]
——— https://amzn.to/2Xb8kiN [ AMZ ]

• Tsukineko VersaFine ONYX BLACK Ink Pad VF
——— http://tiny.cc/k4th7y [ SSS ]
——— http://tiny.cc/k4th7y [ CST ]

• Tim Holtz Tonic GLASS MEDIA MAT
——— http://tiny.cc/96th7y [ SSS ]
——— http://tiny.cc/z9th7y [ CST ]

• Sizzix Big Shot Machine Only White & Grey UK
——— http://tiny.cc/lbuh7y [ CST ]

• Gel Pen BLK GLAZE sakura
——— http://tiny.cc/3cuh7y [ SSS ]
——— http://tiny.cc/3cuh7y [ CTP ]

• Gel Pen CLR GLAZE sakura
——— https://shorturl.at/kyRZ0 [ SSS ]
——— https://shorturl.at/hrPX1 [ CTP ]

• Gel Pen WHITE uniball
——— https://shorturl.at/fjkwG [ SSS ]

• Nuvo by Tonic AQUA SHIMMER PEN
——— https://shorturl.at/hqQY6 [ SSS ]
——— https://shorturl.at/vyMNR [CST ]

• COPIC MARKERS:
Elephant: W4, W3, W1, W00, RV93, RV91
Dress/Bow: V09, V06, V01, V000

• Spellbinder TOOL N’ ONE
——— https://shorturl.at/eESY1 [ SSS ]
——— https://shorturl.at/rBCKL [CST ]

• Tonic 12” GUILLOTINE
——— https://shorturl.at/iBHJO [ SSS ]
——— https://shorturl.at/aDIQ3 [CST ]

************************

Some of the links above are affiliate links.  This means I receive a small commission should you purchase something through one of the links in the supplies list at no additional cost to you.  Please know I appreciate every single purchase made through my links and it enables me to continue to bring you crafty inspiration!  Thank you from the bottom of my heart xx

Time for Tea Designs new release! 'Moo-vellous' stamp set

Hi crafty friends I hope you are well!  Today I am back to share this super cute clean and simple card featuring stamps and dies from Time for Tea Designs new release...I just love this cow and his floppy hair!  This stamp set is called 'Moo-vellous'.

To celebrate the new release I have a coupon code to share - T4TPINKPEPPER10.  Use this at the checkout to receive 10% off your order for a limited time.  Right, now to move on to how I made the card!

I first stamped the images on to my favourite copic friendly cardstock with memento tuxedo black ink.  The images were coloured using my copic markers which I have listed below:

Once the images were coloured I die cut them with the co-ordinating dies, then popped them to one side while I worked on the rest of the card.

I next made a cardbase using some heavyweight white cards stock.  This particular card is a side folding A2 size card so the base was 8 1/2"x5 1/2" scored and folded at 4 1/4".  The top card panel was also cut from heavyweight white card and measured 5 1/4"x4" and was adhered to a piece of kraft cardstock measuring 4 3/8" x 4 1/8" to give a small border around the top panel.  

Before adhering anything to the cardbase I cut the 'smile' sentiment die from some black cardstock and stuck this to the white card panel.  The 'you are moo-vellous' stamp was stamped using my mini misti tool with some Versafine onyx black ink.

The kraft panel was then adhered to the white card base with some strong liquid adhesive.  I gathered my coloured images and then arranged them on to the card front.  I laid some post-it tape over the top of the images in the arrangement I was happy with.  I flipped them over, popped foam tape on to the back and this held all the images together.  I removed the release paper from the foam tape and then carefully turned the collection of images over and secured to the card base.

Finally I added some nuvo aqua shimmer pen to the petals of the flowers and the birds along with some clear glaze pen for the birds beaks.  This is the card complete!

I hope you enjoyed this card and the crafty process to make it!  Here is a list of the supplies used to make the card....don't forget you can use my coupon code T4TPINKPEPPER10 to get 10% off your order!  Happy shopping!

Product list:

Moo-vellous stamp set - click here

Moovellous co-ordinating dies - click here

Inside Scalloped/Stitched Frame and Smile Script Die - click here (this item is a create and craft exclusive and not eligible for the discount)
Copic Cardstock  - click here
Heavyweight White Cardstock - click here
Memento Tuxedo Black Ink
Versafine Onyx Black Ink
Copic Markers
Foam Tape
Liquid Adhesive
Kraft Cardstock - click here
Tonic Guillotine
Fiskars Scoring Paper Trimmer & Scoring Tool

DIY Sliding Window Card with Secret Shaker Element

Hello everyone! So sorry I've not posted in a few weeks! Life has been crazy busy with Easter holidays, illness and general life admin! Over the next few weeks I hope to post a lot more on my blog and upload more videos to my YouTube channel which you can find here.

For today's card I am sharing another sliding window card but this time I've added a twist!  I've added a hidden shaker element to the card plus I've created my own sliding window panel.

I started with a card panel slightly larger than A2 size blended on some twisted citron and evergreen bough distress ink.  I used the Newtons Nook Tropical Leaves stencil and blended on some more of those inks over the top to create a fun jungle theme element to my card.  To add texture I splattered on some green jewel paint (I used the Gansai Tambi Pearl Watercolor pallet) before removing the stencil.  Once the panel was completely dry I used and A2 size rectangle die to die cut the panel to size.

To start creating the sliding window panel I took a rectangle die from my stash to create a template.  Any rectangle die will do...you just need it to be smaller than A2 size and give a wide enough border to allow adhesive to run along the edges - I used  to cut a rectangle from lawn fawn.  I cut the rectangle from a piece of scrap cardstock.  This will be my template to help create my sliding window panel. On to the template I measured out some markings to help me work out where I would score and cut my card panel-I've created this diagram below to help explain.

The small rectangle at the bottom will help form part of the pull mechanism for the sliding window.  Rectangles 1 & 2 should be even in size so that the sliding window can pull up without buckling or bending.

I then placed this template centrally on to my inked up card front and used by craft knife to cut around three sides of the template.  I removed my template and then used a scoring tool to create score lines to form the pop up sliding feature (my video will probably show a better visual explanation!)

This diagram shows where to cut, and where to score.....

To cut out the notch at the top of the card panel (and the front panel of my cardbase) I used a die from MFT blueprints tag 5. Before moving on to decorating the hidden panel I flipped over the front card panel (i.e. jungle face down) and placed some double sided adhesive along the small strip at the base of the sliding window flap.  I cut a piece of cardstock slightly wider (ensure it is only slightly wider - you don't want it to get in the way when you put the card together) than the sliding window element, removed the release paper from the tape and secured the cardstock flush along the edge.  If the cardstock is too long (overhangs the top of the top edge of the card) just trim it down to size

For the hidden panel/shaker window I took the cardbase and lightly blended on some distress ink (twisted citron, evergreen bough), stamped some leaf images in co-ordinating colours (hello bluebird-jungle littles) and stamped a sentiment in Versafine onyx black ink (sentiment also from jungle littles stamp set).

I took strips of foam tape (I made custom sized strips by sticking foam tape to the release paper of label paper and then cut into strips with a craft knife).  I placed the foam tape along both sides of the cardbase, the bottom of the cardbase and then a small strip along the top but below the cut notch.  

I placed sequins in the well created, removed the release paper from the foam tape and secured a piece of acetate over the top.  The acetate was cut to size, avoiding interfering with the notch at the top of the card.

More double sided adhesive was placed on top of the acetate using the foam tape as a guide for placement. The release paper removed from the tape and then the front card panel (the one with the slider flap on!) secured to the cardbase. 

With the slider and shaker elements finished its time to finish the front of the card!

I cut the 'HAPPY birthday' sentiment by hello bluebird from some black card stock.  I then glued the HAPPY to the card front.  I coloured and die cut the cute little monkey from jungle littles and hooked him on to the 'birthday' element.... I used glue and some reverse tweezers to secure into place.  To secure to the card I only placed glue on the bottom half of the 'birthday' die cut to ensure it popped up when the slider mechanism is pulled as it is placed across the middle score line.

The monkey's little present is from Mama Elephant Page Huggers stamp set....it was the perfect size for the monkey!

I used copics to colour the monkey & present.  The monkey was coloured with E70's (body) and E40's (face).  The present I used some R80's.

To finish off the card I added some black glaze pen to the monkey's eyes and nose plus some white gel pen to add some highlights.  To add a little bit more sparkle I took some spring green jewels from Pretty Pink Posh and glued them to the card front using my jewel picker and some Gina K connect glue.

I hope you enjoyed this card and I hope this post helps you to make one too! I made YouTube video which I think will explain thing better, visually:

 Here is a list of all the supplies I used to create this card:

SS - Simon Says Stamp US
DST - Dies To Die For UK
SVN - Seven Hills Crafts UK
CST - Craftstash UK
BMB - Bumbleberry’s UK

• Hello Bluebird JUNGLE LITTLES Clear Stamps
https://bit.ly/2Y9pHkh [ SSS ]

https://bit.ly/2PMfKpV [ MNN ]

• Hello Bluebird JUNGLE LITTLES Die
https://bit.ly/2ZQpeVT [ MNN ]

• Hello Bluebird HAPPY BIRTHDAY Die
https://bit.ly/2WqCnmg [ SSS ]
https://bit.ly/2VLGU5F [ MNN ]

• Lawn Fawn LARGE STITCHED RECTANGLE STACKABLES
https://bit.ly/2ZUevJZ [ SSS ]
https://bit.ly/2Y8EqMh [ DST ]
https://bit.ly/2J1Jrmi [ SVN ]

• My Favorite Things TAG BUILDER BLUEPRINTS 6
https://bit.ly/2vD5LtE [ SSS ]
https://bit.ly/2vzl1Id [ DST ]
https://bit.ly/2Jlfe15 [ SVN ]

• Tim Holtz Distress Ink Pad TWISTED CITRON
https://bit.ly/2vzBYSG [ SSS ]
https://bit.ly/2I6SIol [ CST ]

• Tim Holtz Distress Ink Pad EVERGREEN BOUGH
https://bit.ly/2H1y4sj [ SSS ]
https://bit.ly/2vCusq4 [ CST ]

• Newtons Nook TROPICAL LEAVES stencil
https://bit.ly/2IYEUkF [ SSS ]
https://bit.ly/2DOa75J [ SVN ]

• Gansai Tambi PEARL WATERCOLOR SET - 6
https://bit.ly/2Y6iktE [ SSS ]

• Sequins - The SKYFALL mix are no longer available but this sequin mix from Lucy’s Cards are similar and equally lovely!
https://bit.ly/2LkBzOF [ LCY ]

• Nuvo Pure Sheen Confetti GOLDEN YEARS (ROSE GOLD SQUARES)
https://bit.ly/2VN4uPk [ SSS ]
https://bit.ly/2Ln5Dt3 [ CST ]

• Mama Elephant PAGE HUGGERS Clear Stamps
https://bit.ly/2JaGu20 [ SSS ]
https://bit.ly/2Y3LZDU [ DST ]
https://bit.ly/2Lm2UAc [ SVN ]

• Mama Elephant PAGE HUGGERS Creative Cuts/Dies
https://bit.ly/2JaGu20 [ SSS ]
https://bit.ly/2Y3LZDU [ DST ]
https://bit.ly/2Lm2UAc [ SVN ]

• Scor-Tape 1/8 Inch Crafting Tape
https://bit.ly/2H0FNa2 [ SSS ]
https://bit.ly/2Kzp9kE [ CST ]

• Tsukineko VersaFine ONYX BLACK Ink Pad VF
https://bit.ly/2rkFAWm [ SSS ]
https://bit.ly/2tvJL2H [ CST ]

• Tim Holtz Tonic GLASS MEDIA MAT
https://bit.ly/2uZEMaX [ SSS ]
https://bit.ly/2HrbrON [ CST ]

• Sizzix Big Shot Machine Only White & Grey UK
https://bit.ly/2MKlLBp [ CST ]

• Copic OPAQUE WHITE WITH BRUSH APPLICATOR 053720
https://bit.ly/2vyksOP [ SSS ]

• Pretty Pink Posh SPRING GREEN Jewels
https://bit.ly/2IW507X [ SSS ]
https://bit.ly/2WldXL3 [ DST ]

• 3M Scotch DOUBLE-SIDED FOAM TAPE Permanent
https://bit.ly/2gUCulx [ SSS ]

• Hot Off The Press HEAT RESISTANT ACETATE 5 Sheets 8.5x11
https://bit.ly/2VbeGSg [ SSS ]
https://bit.ly/2J7QNjI [ CST ]

• Gina K Designs CONNECT GLUE Adhesive 5614
https://bit.ly/2JdtGI9 [ SSS ]
https://bit.ly/2LlpFUT [ BMB ]

• Gel Pen BLK GLAZE sakura
https://bit.ly/2Iqg2yb [ SSS ]

• Gel Pen WHITE uniball
https://bit.ly/2he8ncq [ SSS ]

• Spectrum Noir CLEAR SPARKLE PEN
https://bit.ly/2ZWe55B [ SSS ]
https://bit.ly/2LlrTDJ [CST ]

• COPIC MARKERS:
Monkey (body): E77, E74, E71
Monkey (face): E44, E43, E42
Present: R85, R83, R81